View Single Post
Old 07-18-2010, 10:18 PM
ArTurf ArTurf is online now
LawnSite Silver Member
Join Date: Jan 2007
Location: Ark
Posts: 2,784
I just replaced the clutch with a new one. It still does not work. There is 12.5 volts going to the pigtail when the switch is on. The new clutch has the same ohm reading as the old clutch so I am guessing the old clutch is still good. What gives? What am I missing?
Page generated in 0.03655 seconds with 8 queries