View Single Post
  #2  
Old 08-02-2010, 10:27 AM
Wet_Boots's Avatar
Wet_Boots Wet_Boots is online now
LawnSite Fanatic
 
Join Date: Mar 2005
Location: metro NYC
Posts: 40,072
If you are trying to reduce solenoid voltage, you would do better to employ a resistor in series with the load. Of course, you could just go direct to the valves, and make them electric-controlled. Are they Normally-Open valves?
Reply With Quote
 
Page generated in 0.03709 seconds with 7 queries