View Single Post
Old 08-24-2010, 04:09 PM
MarcSmith MarcSmith is offline
LawnSite Fanatic
Join Date: Jul 2004
Location: Washington DC
Posts: 7,238

resources, then find your model for manuals in pdf formats...

have you taken off the nut on the top of the hydro and topped off the fluid and then put some fluid in the cup. remember the cup is only supposed to have about 1/4" of fluid in it cold. the cup is mainly for the overflow when the fluid get hot. its possible that the plastic cup has cracked around the threads and the cup itself is the source of the leak...

the pto gear boxes are either leaking around the shafts or the cover seal. should be easy enough to find the leak...clean the box up fill it with oil and see where it leaks chances are its a shaft seal. in which case Id replace all the seals. if you open the box up and start messing around might was well be proactive
Reply With Quote
Page generated in 0.03576 seconds with 8 queries