View Single Post
Old 09-26-2010, 09:48 PM
Roger Roger is offline
LawnSite Fanatic
Join Date: Dec 1999
Location: McMurray, PA
Posts: 5,892
The top and bottom ends of the carb needs to be removed. I chose to remove the top first, the end with the primer bulb. Four screws hold the top in place. When removed, the gasket and diaphragm are stuck together, looking like a single piece.

The replacements are made, and the end is closed up with the four screws.
Attached Images

Last edited by Roger; 09-26-2010 at 09:55 PM.
Reply With Quote
Page generated in 0.04094 seconds with 9 queries