View Single Post
  #17  
Old 10-12-2010, 08:18 AM
Aussie12's Avatar
Aussie12 Aussie12 is offline
LawnSite Member
 
Join Date: Aug 2010
Location: Brisbane QLD
Posts: 21
Okay, I fitted the seal a few days back... put her all back together, I have not done any mowing work with it, but I have been moving her around the shed, mostly to get it out of the way for other stuff... so far so good, no drips on the floor :-) ... I am selling it to a friend, hope it goes well for them, thanks for all the advice and help on that job.

Now, I have another walker GHS 26 EFI, I changed the hydro and drive gear oils, after stopping the machine the hydro on 1 side seems to stick sometimes, I mean when I pull or push the go leaver's I can hear the hydro labouring but there is no drive movement, I just jiggle it forward n back a few times and it seems to work but something must be wrong? any ideas appreciated.

Thanks, Les.
Reply With Quote
 
Page generated in 0.03654 seconds with 7 queries