View Single Post
Old 11-08-2010, 09:59 AM
turfcobob turfcobob is offline
LawnSite Senior Member
Join Date: Jul 2005
Location: Lincoln, Nebraska
Posts: 878
Originally Posted by kennc38 View Post
Hi Bob - Can you explain how you turn the machine so easily? Do you have to lift the front wheels or is it dual hydro where you can turn it similar to a dual hyrdo walk behind? Thanks.
Several things come into play to make the turning easy. length of handlbar, location of weight and free wheeling tines.

The handle bar is long enough to give you good leverage against the mass of the machine and they are mounted a little behind the pivot axle for added leverage.

The weight is concentrated right over the tines so you do not have to lift mass to turn just pull sideways on the long handle.

The center tines are the drivers and the outside sets are free wheeling. So the leverage only has to pivot the center tines when making turns.

Call if you have more questions. 402-783-2028 cell 402-432-2446

Reply With Quote
Page generated in 0.03294 seconds with 8 queries