View Single Post
  #4  
Old 12-05-2010, 11:27 PM
cut-rite cut-rite is offline
LawnSite Member
 
Join Date: Jan 2001
Location: mid coast,Maine
Posts: 69
this has a QD type bushing , remove the 3 small bolts from the pulley and thread them into the tapped holes in the bushing . this will separate the pulley from the tapered split bushing . when reassembling dont over tighten the bolts it will crack the pulley
Reply With Quote
 
Page generated in 0.03298 seconds with 7 queries