View Single Post
Old 01-31-2011, 06:16 PM
Barefoot James's Avatar
Barefoot James Barefoot James is offline
LawnSite Senior Member
Join Date: Jan 2008
Location: Louisville, KY
Posts: 984
Yes and if it could hold say 12 cu ft and had a tipper so the hopper could flop over you could use it as a mulch transporter and dump it into beds. If it had a conveyer belt which moved back to front with an auger system you could also just open the front gate wide open and dump mulch into the bed as well. This said gate would also act as the control gate to determine how much compost, sand, dry materials you would be spreading as well and the auger system would move said product to the brush system and out. For mulch this would be cool as it would actually fluff the mulch for you??

A hopper/spreader system like this could be used on any kind of stand on or ride on as long and the weight was supported by the back on the mower/aerator/skid steer and the front had wheels.

Just some thoughts.
Heath Care Solution - Buy This Book
To help this movement, add below link to your signature
Reply With Quote
Page generated in 0.03954 seconds with 8 queries