View Single Post
  #9  
Old 03-31-2011, 11:22 AM
RigglePLC's Avatar
RigglePLC RigglePLC is offline
LawnSite Fanatic
 
Join Date: Jul 2006
Location: Grand Rapids MI
Posts: 9,558
So you are getting 0.2 gal per 1000 sqft. Do you mean you are getting about 100 ounces of spray per minute? Is the pump belt tight? Any hoses plugged or kinked? Pressure regulator valve failed or jammed with debris? About what percent of solution is pumping back to tank? How many pounds pressure? Can you block the spray by putting your finger over the hose end? How does it work if you take the nozzle out and check the flow with no nozzle in place? How come a 2 gal per minute pump is putting out less than 1 gal? Air in system? Suction leak? Fully primed?
Reply With Quote
 
Page generated in 0.03726 seconds with 7 queries