View Single Post
Old 04-06-2011, 09:42 AM
944own's Avatar
944own 944own is offline
LawnSite Bronze Member
Join Date: Aug 2010
Location: Chattanooga TN
Posts: 1,158
Originally Posted by Pennington Lawncare View Post
It's time to get a better impact. I started out with one of the cheapo Campbell Hausfelds and it was ok until I bought a cheap riding mower from one of my customers. One of the blades on that Huskee riding mower was bent and I couldn't remove the blade with my cheap impact. I borrowed a better one from a mechanic and also had to borrow the larger air fitting. I think it's a type T or N fitting from Tractor Supply. Those fittings are what most tire shops have on their hoses and the hole through the center is about twice as large as the small hole that comes with most cheapo kits. So I'd recommend you get a decent impact capable of at least 450 ft. lbs. of torque and put some decent fittings on your air hose.
My impact is a craftsman could it be my compressor is not putting out enough psi.
Chevy W4500
Reply With Quote
Page generated in 0.03911 seconds with 8 queries