View Single Post
Old 05-13-2011, 11:31 PM
flatlander42's Avatar
flatlander42 flatlander42 is offline
LawnSite Silver Member
Join Date: Jul 2008
Location: nebraska
Posts: 2,250
PIC #3 of post #51. Look close at the gap between the ramp and dovetail. Turns out I am not patient enough when welding the mesh on the ramp. It warped it. If you sight your eye down the width of the ramp, you can see it warped it about 1/2". I thought about turning the ramp upside down, parking my navigator on it and beating it back straight. Then the more I thought about it it may have bent like this over time anyways. IF it ever becomes a problem I could always straighten it out and weld something over that top piece of square tube.

That is the one problem I will have with the hinge points so far appart.
I'm not a Miracle Worker, if it looks like crap now, it will look like crap with stripes when I am done.

My E-450 Dovetail Van project thread.
Reply With Quote
Page generated in 0.04067 seconds with 8 queries