View Single Post
  #44  
Old 08-12-2011, 07:32 PM
Oregon OEP Oregon OEP is offline
Sponsor
 
Join Date: Apr 2008
Location: Kansas City MO
Posts: 131
Quote:
Originally Posted by Ridin' Green View Post
Thanks. Are those just stock pics, or are they actually the blades for the 7 Iron? I have noticed at my local dealer that gator magnum blades for different brands of machines seem to have different lift fin heights.
I am curious as to just exactly what the ones for 7 Iron look like. I have OEM high lifts on it now, which have a very high fin/sail, and they work awsome, but if I can get a G6 that has roughly the same lift fin height, I am more than willing to try them out.
Those are general stock. The Magnum's did vary alot from blade to blade but the G6 are all very close to the same as this picture. There is a slight tolerance but not much. What size cut do you have?
__________________
Dennis Wainwright
Technical Services Manager
Oregon® Outdoor Equipment Parts
Reply With Quote
 
Page generated in 0.03614 seconds with 7 queries