Originally Posted by Restrorob
Possible a piece of trash entered the float valve when the fuel line was re-installed or the float needle valve is bad, I'd re-clean and replace the needle valve then run it till it blows.....
Thanx for the word but maybe you can put me at ease. I looked into what you said and found a parts diagram and where it is leaking was not where the float needle valve is. I put some pix on of the part that is leaking or at least where it looks like it is leaking. Also put a wide shot to show the area where it is if it helps. I'm hoping you tell me I am dumb and that's where it will leak. Thanx for all your help.