Thread: meg-mo system
View Single Post
  #16  
Old 08-23-2011, 06:21 PM
mallio mallio is offline
LawnSite Member
 
Join Date: Sep 2009
Location: Iowa
Posts: 48
You have to disassemble meg mow blades to sharpen. First check the balance of the center disk. If you can see a nick on it you can bet it is out of balance. Weigh the blades and re assemble the unit. Otherwise you will have balance problems. I really didn't like working on them very much. We were heating the bolts then using lock tight to reassemble the units.
Reply With Quote
 
Page generated in 0.03960 seconds with 7 queries