View Single Post
  #21  
Old 10-17-2011, 09:11 PM
ed2hess's Avatar
ed2hess ed2hess is online now
LawnSite Fanatic
 
Join Date: Nov 2002
Location: Austin Texas 78727
Posts: 11,350
Quote:
Originally Posted by djagusch View Post
The only thing Ed is missing is an exhaust analyzer to make sure it is running properly. Plug readings, and checking exhaust temps could also make sure it is running right. He got the carb from Kohler directly so it should be pretty close from the get go.
You got me curious.......since I didn't do any of the above except
rpm what do I need to do? The machine wouldn't start after a couple days so I opened the adjusting screw that has a lock nut about 1 and 1/2 turn. It now starts and runs fine at idle and under heavy load. There is an idle screw and a run screw that is caped so I didn't touch neither. Should I expect this propane to run hotter than gas?

This machine isn't being used much so ......I got time to take it back
in to the shop. And to Terry I understand. I need to get more information.
Reply With Quote
 
Page generated in 0.04007 seconds with 7 queries