Thread: Spray Boom
View Single Post
  #9  
Old 10-21-2011, 12:31 PM
ArTurf ArTurf is online now
LawnSite Silver Member
 
Join Date: Jan 2007
Location: Ark
Posts: 2,168
Quote:
Originally Posted by greendoctor View Post
Attached is the walking boom that I use for turf and bare ground applications. I normally use AI nozzles in the boom. The next photo is the Solo 433 power sprayer and the 23L 7676-24 gun, with pressure regulator. That is what I use if the area is small or I am "spot treating". There is an XR Teejet fan tip on the end of the wand. Lastly, the double nozzles on a swivel are what I use for spraying shrubs, hedges, short trees and nursery stock. I have the discs from DCER-2 all the way up to DCER-8 and the matching cores. Cone angle, volume and hollow or solid cone patterns are all determined by which disc and core are installed. This set up sprays a very high pressure mist that penetrates dense foliage and due to the adjustable angle of the spray head, it is easy to spray under leaves.
GD
When you are blanket spraying with the boom how do you keep track and prevent missed spots or overlap?
Reply With Quote
 
Page generated in 0.03297 seconds with 7 queries