View Single Post
Old 12-07-2011, 07:41 PM
ed2hess's Avatar
ed2hess ed2hess is offline
LawnSite Fanatic
Join Date: Nov 2002
Location: Austin Texas 78727
Posts: 12,625
Originally Posted by Terry Metro Lawn View Post
It doesn't take much vacuum to open the lockoff. You can suck on it.

I'm wondering if the cylinder is mounted correctly OR if you are using a forklift cylinder.

is it freezing-up anywhere?

Also, make sure you open the cylinder valve slowly to not slug the excess-flow valve.
I have three units running on propane and the other two don't have any
problems with the set of tanks I am using...but is there a way to identify the
forklift tanks? I can post pictures of the tanks. I see no freezing up any where. I do slam the valve open so I will try doing that slowly. I got my brake bleeder pump ready for tomorrow. Right now we are using the fuel pump but what about just hooking directly from the vac line going to the fuel pump to the reg valve?
Reply With Quote
Page generated in 0.03843 seconds with 8 queries