Quote:
Originally Posted by unkownfl
I took my kit off of my Wrights. I only use the plate. It does leave rows but I over lap them and then flip the plate up when I can and discharge the lines away. Not every yard does it. It's mainly when its heavy growth and I'm trying to get it down to the 4 inch range instead off all the way up. Move your blades up in the deck more and you won't get much if any blow out but it will clog and need scraping more often. I welded the plate to the discharge assemble and took off the rubber and cut the extra stuff off. Basically its a homemade ocdc.
|
What blades are you running? So you think the kit is worthless?