View Single Post
  #7  
Old 04-01-2012, 11:31 AM
JCLawn and more's Avatar
JCLawn and more JCLawn and more is online now
LawnSite Platinum Member
 
Join Date: Sep 2009
Location: MI
Posts: 4,768
2x8x12's with 2x4 under them for support then put expanded metal over the top of the woods, a 2x4 running along the outside of the board to keep from falling off, then take a 1/4-1/2 bar bend it so it attaches to the board flat and can lay on your tailgate flat. Then take 10 0r 12 gauge rectangle and bend it so it goes on top of the metal bar so its like a deck that goes over the bar to drive on. I have pictures if you need some. I made this and it has lasted about 5 years. I used it to drive a 42inch zero turn in the back of my truck.
Reply With Quote
 
Page generated in 0.04418 seconds with 7 queries