View Single Post
Old 05-14-2012, 12:15 PM
Rain Man av Rain Man av is offline
LawnSite Member
Join Date: Oct 2007
Location: Leander, TX
Posts: 133
Kohler CV730S, CV730-0017 25HP

Broke a rod and damaged block and oil pan. Is it worth the effort to port good components into used block and pan. Or should I scrap it. The engine is on a Craftsman GT5000 with 48 in cut deck.

I don't know why it broke a rod. I am told there was oil in the engine at the time of failure due to the large quantity that was expelled through the crack in the block.

Does this engine have a high failure rate ?
I found a block and oil pan- used, in good condition for less than $300 locally. Is it worth the effort to port over the crank, pistons, cam, etc.

I have a Briggs 24HP OHV engine available that I paid $75, it runs good, is it possible to swap ? I don't see that this model Craftsman came with Briggs. The model number for the mower is missing.

Inquiring minds want to know.
Reply With Quote
Page generated in 0.03971 seconds with 8 queries