Originally Posted by mtmower
Ok. I don't even want to get on here and admit this. I took it back in the shop and started from scratch on the deck pitch and found out between the cantilever adjusters, clockwise and counter clockwise turning of the bolts, my JD gauge working on a seesaw pivot, and just being plain dumb I had managed to pitch the deck backward. I had the rear at 3 5/8" and the front at 3.5"! 1/8 inch lower in the rear. So I kicked the dog a couple of times and corrected it setting the front at 3.5" and the rear at 3 3/8".
You DO realize that 3 5/8" is more than 3 1/2" right?
And 3 1/2" is more than 3 3/8" right?
Maybe your not good at fractions?
Order a set of new SuperZ blades and try them out!