View Single Post
  #10  
Old 06-27-2012, 03:49 PM
Capemay Eagle's Avatar
Capemay Eagle Capemay Eagle is offline
LawnSite Bronze Member
 
Join Date: Apr 2007
Location: Capemay NJ
Posts: 1,738
Quote:
Originally Posted by sprinter View Post
Take a look at the underside of your seat and measure the bolt pattern. It should be 11" x 11-1/4" (11-1/4 across on the pic). If so, and the nuts are accessible, it should just plop right in there. It comes with nylock-type nuts. Measure your seat switch as I described before to see if it's a normally open or closed switch. The Michigan's seat is normally open and the switch closes when sat on.
Thanks for the post. I will check it out today. I have to go out and cut soon anyway. I will measure it up on the clean up.
__________________
John Deere X300 42"
Craftsman YT3000
Echo PB413
Echo SRM-210
Stihl BR-600 Magnum
Stihl FS90
AMSOIL In Everything I own
Reply With Quote
 
Page generated in 0.04549 seconds with 7 queries