Thread: Tool
View Single Post
Old 07-05-2012, 10:42 AM
piston slapper's Avatar
piston slapper piston slapper is offline
LawnSite Platinum Member
Join Date: Mar 2010
Location: Tampa Fl
Posts: 4,221
As you have to look at the rocker arms to make sure you are on the compression stroke...
I usually just loosen the rocker arms .and pop them off the pushrods...and just shoot the air to them...
The rings shouldnt leak any more with the pistons at the top or the bottom...
with no pressure from the pushrods..the valves should be closed...
If You Have All The Answers...Except The One You Need...You're Not Trying Hard Enough...
Do The Work
Reply With Quote
Page generated in 0.04035 seconds with 8 queries