View Single Post
Old 07-26-2012, 06:41 PM
dmelideo dmelideo is offline
LawnSite Member
Join Date: Jul 2008
Location: Allentown, PA
Posts: 11
PJ - The baffle was mounted in the standard position. I changed it to the lowest holes or about 1/2 inch. Directionally, there is less debris blowing up into the seating area and my face but I still get a reasonable amount of dust/debris when cutting over dryer areas. Due to the weather and slope areas, I am cutting at 4.5 to 5.25 inches. Do you have any other suggestions?

Page generated in 0.03837 seconds with 8 queries