View Single Post
  #9  
Old 07-30-2012, 08:26 PM
joes169 joes169 is offline
LawnSite Member
 
Join Date: Aug 2010
Location: WI
Posts: 236
Not sure how rusty or corroded the screw are, but if they're bad, hold the square bit with a 1/4" wrench and strike it abrubtly with a small hammer, and it should be loose enough to turn out with a drill w/o stripping. Usually, the ramp doors corrode relatively fast, especially in the "rust belt".......
Reply With Quote
 
Page generated in 0.04406 seconds with 7 queries