Originally Posted by RonWin
I am looking at getting this setup for my power washing venture and was wondering what your guys take is on it and i also have a few questions. I am also trying to work with somewhat of a budget but i will consider reinvesting more capital into a different setup if it is more profitable/reliable/plainbetter in the long run of things. Right now I am looking at purchasing a 4000psi 3.5-4GPM PW'r unit. Looking to spend around 1k tops. My options from "homedepot" are generac 4kpsi 4gpm $899, dewalt 4k psi 3.5gpm $799, dewalt 4k psi 4gpm $999. Are these commercial grade power washers ? Will they last me a long time/ not have to deal with much break downs/reliability AND do a great job (for the $)?
I understand that i will need an X-Jet nozzel? cant seem to find one at homedepot, unless it has a different name? Also looking for a 15ft rubber pickup tube and 100' of water hose and psi hose? The pw'r comes with a 50ft hose, how much for a 100' one? Also a 5gal bucket for bleach. Is there any need to invest in a certain type of wand or use the wand that comes with the power washing unit? Im looking to focus on houses 2 stories tall but i do not want to limit myself if a 3 story house/commercial building comes along. Am i missing anything else in this setup? I have a f250 truck with an 8' bed to truck this thing around. All Advice appreciated and taken into account. How is is this setup/should i get something else?
One thing I can tell you is, if you are washing pavement, invest in a surface washer as soon as you can afford one. It will make you about 4x more productive at washing concrete. Next thing you should invest in is a reel and at least 200 ft of pressure hose. You have no idea how much time you will save if you don't have to load and unload your pressure washer, or roll up/roll out your hose by hand.
Posted via Mobile Device