View Single Post
  #7  
Old 08-20-2012, 06:54 PM
MidwestTurfInc MidwestTurfInc is offline
LawnSite Member
 
Join Date: Aug 2012
Posts: 26
im not familiar with John Deere but the only thing I would add on top of other's suggestion would be your spindles condition. Obviously if it made a sound it would be apparent that it were faulty. But it could be possible the spindle's nut has backed off and the spindle is sagging below the bearing housing. If the blade touch tip to tip though that wouldnt be the case.
Reply With Quote
 
Page generated in 0.03425 seconds with 7 queries