View Single Post
  #3  
Old 09-20-2012, 08:14 PM
murfpcola murfpcola is offline
LawnSite Member
 
Join Date: Sep 2012
Location: pensacola FL
Posts: 30
Found number on belt and it is the correct belt. I was able to download a parts manual for this mower. Still tinkering with my wont disengage problem. Any advice?? At one point I tightened the blade brake but when I cranked the mower The belt was trying to grab and making a squealing sound. Do I just keep loosening the tensioner? One thought I have is the engine pulley may have been swapped and is too narrow for the belt not allowing it to slip like it should. This mower was kind of a basket case that I had to put back together and I am sure has been worked on by many people in the past so anything is possible. Any tips or suggestions are appreciated!!
Reply With Quote
 
Page generated in 0.03157 seconds with 7 queries