Thread: Bagging Issues
View Single Post
  #4  
Old 09-22-2012, 09:54 AM
Ridin' Green Ridin' Green is offline
LawnSite Fanatic
 
Join Date: May 2011
Location: Michigan
Posts: 8,511
After checking to make sure everything is running correctly (rpm's etc), try a lower lift blade than what you are running now. You hit the nail on the head with your post regarding many bagging problems. Too much blade lift in thick leaves and/or grass can over power the blower fan sometimes. Also check to make sure that you tube doesn't have something inside it that is causing an airflow issue. Last, and this may sound insane but it happens- make sure the blower fan belt is routed over the drive pulley the right direction and that the fan isn't actually spinning backwards from normal direction of operation.
Reply With Quote
 
Page generated in 0.03781 seconds with 7 queries