View Single Post
Old 09-27-2012, 12:58 PM
Restrorob's Avatar
Restrorob Restrorob is offline
LawnSite Fanatic
Join Date: Apr 2005
Location: Show'n my truck off !
Posts: 11,004
If you've smelled rubber it's likely time for a new belt, But...... Check your hydro belt as well. Make sure the hydro belt idler arm is positioned straight up/down (pulley 1.25" off the frame), Then install the new deck drive belt and make that adjustment with the rod/spring on the triangle plate. Adjust so the handle snaps into place.

The rear deck belt guides should be adjusted 1/8" to 3/16" forward of the pulley and away from the belt when engaged, Also lube the triangle plate and all moving deck engagement parts to assure proper tensions.

The proper belt is a B85 RAW edge, Anything else is a waste of time and money.......
Originally Posted by piston slapper View Post
You never learn anything until you admit you don't know it all...
Originally Posted by MannsLawnService View Post
some times the man in my mirror isn't so smart...
"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!

Last edited by Restrorob; 09-27-2012 at 01:03 PM.
Reply With Quote
Page generated in 0.04211 seconds with 8 queries