View Single Post
Old 09-28-2012, 05:42 PM
BigFish's Avatar
BigFish BigFish is offline
LawnSite Bronze Member
Join Date: Jul 2008
Location: chesapeake, va
Posts: 1,944
Originally Posted by Lasko's Lawn Service View Post
Big Fish...the circuit does have a relay in the control panel...does this same relay act as a starter assist described above? Anyway to test that to see if its working correctly and putting the 12 volts out?
Same thing, just done by the mfg. instead of an add-on. As per Resto.
Testing is easy, the wire that feeds your starter solenoid comes off the cube relay, so, if it is getting 12V when you hit the start switch the relay is good.
Unplug the wire off the solenoid terminal when testing.
Go to the Scag site and locate your model.
Then download the owners manual, it should have a wiring diagram to check out.

JimQ is right on with the solenoid descriptions.
" But let me tell you something ,folks: You can't fix stupid! There's not a pill you can take, there's not a class you can go to. Stupid is forever!"
2015 -1

Reply With Quote
Page generated in 0.03972 seconds with 8 queries