View Single Post
  #25  
Old 10-02-2012, 08:03 PM
StanWilhite StanWilhite is offline
LawnSite Bronze Member
 
Join Date: Apr 2010
Location: Decatur AL
Posts: 1,656
Quote:
Originally Posted by StanWilhite View Post
Yes, the tension spring will be loose if there isn't a belt on the pulley system.

I didn't read all of the posts, so let me say this.

If your deck uses an electric PTO to engage the deck, the belt should be fairly taught all of the time. If your more uses a manual PTO, the deck belt will be loose when the deck is disengaged, and fairly taught when it's engaged.

You never want to "over tension" your belt because because it will wear your bearings out. Experience will teach you how tight it should be.

As a general rule I always say that the belt should be as loose as possible without slipping when you run into high, thick grass/ weeds. It should be tight enough to kill the engine before it slips.
Stan
I can't believe ya'll let me slide on the mistake of using the word "taught" instead of correct term "taut". We'll, this "taught" me a lesson....always triple check your post when you're very tired. Come on, I know somebody caught it and was just being polite by not mentioning it.
Ridin'.....anybody.?.....
Reply With Quote
 
Page generated in 0.03979 seconds with 7 queries