Originally Posted by herler
It is very easy just be careful small parts.
I would HIGHLY recommend doing it on a solid surface such as cement or a big piece of wood or even spread a tarp because you lose those screws or the metal plate...
4 screws hold this steel plate through which the bulb goes, I am thinking you'll have to remove one or two orange covers.
Remove the screws, replace bulb, re-install.
Not even close!
The BR 600 has a remote "primer" bulb which is a pain to get to.
Ya gotta remove the starter, and the shroud. If yer lucky you can depress the tabs on the bulb base with a small screwdriver and pop it out. Pay close attention to which hose goes where. It helps to have the new one on hand.