View Single Post
  #11  
Old 10-04-2012, 08:48 PM
BigFish's Avatar
BigFish BigFish is offline
LawnSite Bronze Member
 
Join Date: Jul 2008
Location: chesapeake, va
Posts: 1,657
Quote:
Originally Posted by GreenBlade View Post
Thanks for the tips. This is my first scag so I am dissapointed in the cut quality. Don't get me wrong, it can lay down some beautiful stripes. I chose scag because I always heard nothing but good things. The cut quality as of now however, compares to my Cub Cadet I had before this 😩.

I was also thinking maybe cutting height & speed. I cut at 3 1/2. I know you're suppose to cut high. I lowered it down to 3 1/4. Slight difference. As far as speed goes. I'm 3/4-full speed most the time I mow. I now mostly flat ground so I figure this wouldn't and shouldn't affect the performance.
Posted via Mobile Device
I'm a mechanic, not a cutter, but when you say "3/4 speed etc" do you mean the engine is at 3/4 speed? If so, that could be part of the problem. You wanna keep the engine and blades runnin at top speed all the time!
__________________
" But let me tell you something ,folks: You can't fix stupid! There's not a pill you can take, there's not a class you can go to. Stupid is forever!"

......AMF!
Reply With Quote
 
Page generated in 0.03903 seconds with 7 queries