View Single Post
  #1  
Old 10-05-2012, 11:15 PM
dochuff dochuff is offline
LawnSite Member
 
Join Date: Oct 2002
Location: Atlanta
Posts: 14
Toro 3100 mechanic Atlanta Area

I'm looking for a mechanic well acquainted with a 1994 Toro GM3100 with groomers.

I already have a local reel grinder. My unit needs more than the reels ground.

I know my unit is old, I'm not expecting a new unit.

I need someone who can go over my unit and adjust/repair/replace any worn/damaged parts to give me the best cut possible for my budget.


Recently, I developed a minor hydraulic leak. I see a 2 to 3 inch spot on the garage floor.

In addition, I also have a John Deere Aercore 800 which surges only while aerating. Kohler Command CH18S runs only with choke on even when warm.

Met R Matic F15B top dresser has the chain slipping? when loaded and going up moderate grades.


FWIW I'm just a homeowner with a 10,000 sq ft croquet lawn in Carrollton GA. My lawn is flat as a pool table. Level within 1/4 inch. Turf is Tif Eagle cut at .125 inch 4 to 6 times a week. (by yours truly, I can't afford a crew)



J. Huff
Reply With Quote
 
Page generated in 0.03880 seconds with 7 queries