Thread: Kholer engine
View Single Post
  #4  
Old 10-06-2012, 09:01 PM
piston slapper's Avatar
piston slapper piston slapper is offline
LawnSite Platinum Member
 
Join Date: Mar 2010
Location: Tampa Fl
Posts: 4,027
To replace the lifters...remove the valve cover..remove the rocker arms..remove the lifters..
Remember to torque the rocker bolts to 100 in lbs.when reassembling...
I'm guessing a lifter failed when it was run low on oil..
Probably intake lifter on #1 cyl...the usual culprit...I would replace all 4..
Posted via Mobile Device
Reply With Quote
 
Page generated in 0.03528 seconds with 7 queries