View Single Post
  #3  
Old 10-07-2012, 12:52 PM
BigFish's Avatar
BigFish BigFish is offline
LawnSite Bronze Member
 
Join Date: Jul 2008
Location: chesapeake, va
Posts: 1,657
Quote:
Originally Posted by garyslawn View Post
The hydro pump on my great Dane Surfer 2 is leaking. It apears the the leak is coming from the middle of the pump, where the 2 halfs of pump are put together. Is this possable? thanks Gary
Sure can. Pull it apart and put a seal kit in it.
Service manual can be found here: http://www.hydro-gear.com/Main/servi...-manuals/pumps

Pay attention to the condition of the valve plate. Witness mark everything.
Keep it clean. Get ya a couple cans of spray d o u c h e and don't use rags on the internals. If the cradle bearings come loose, pop it back in place( the man. says replace housing!), and move on.
__________________
" But let me tell you something ,folks: You can't fix stupid! There's not a pill you can take, there's not a class you can go to. Stupid is forever!"

......AMF!
Reply With Quote
 
Page generated in 0.03855 seconds with 7 queries