View Single Post
  #168  
Old 10-11-2012, 05:28 PM
Ridin' Green Ridin' Green is offline
LawnSite Fanatic
 
Join Date: May 2011
Location: Michigan
Posts: 8,511
Quote:
Originally Posted by puppypaws View Post
You know a mower can't cut grass at 15 mph, the blades (according to someone's calculations) just can't turn fast enough to hit all the standing grass...but this is a facetious statement, just added that because many will take take the statement as what I actually believe.

I will totally agree with you on this point, there is no ztr built today with the strength and simplicity of a Hustler Super Z, and this is the reason I continue to buy the Super Z over other mowers. I do want to run a Cheetah for a comparison, and the first thing I will do is check the speed by distance and time, which is more accurate than GPS.
You know, I normally respect your opinions, but when you start whining like a baby because I posted the truth straight from Hustler, you make yourself look very small.

If you want to come at me, then come on with it. No need to post "someone said". Everyone knows I said it. I'll stand by it. Bring your mower up here and see just how much grass it misses at full sticks during the summer months. Just because you mow several acres on a farm, does not make you the end all be all of mower knowledge. Nor does having more than one Z. Many of us have cut as much grass as you have or more, and have some pretty good ideas about what works and what doesn't. Until you've mowed all over the country you have no idea of what works anywhere else other than your immediate area.

Like I said DO THE MATH. The math is what it is. Numbers don't lie. The numbers say that the odds are very high for lots of stringers being left behind, especially on northern turf.

Just because the crap you cut is very stiff and you can cut it clean enough for your satisfaction, doesn't mean it would pass everyone else's standards- LCO or customer. Nor does it mean that your mower willl do it on any other turf grass outside of what you are cutting.

Last edited by Ridin' Green; 10-11-2012 at 05:33 PM.
 
Page generated in 0.04958 seconds with 7 queries