View Single Post
  #12  
Old 10-17-2012, 06:32 PM
larryinalabama larryinalabama is online now
LawnSite Fanatic
 
Join Date: Jan 2008
Location: Ragland Al
Posts: 9,601
Quote:
Originally Posted by ndr_lawn_care View Post
Lots of valuable info on here.

If you have an older (pre-2007) mower with the non-greasable spindles, the bearings are 6204-series. Advance Auto Parts carries a cheaper version of the bearing, it's listed as a 204ff and is around $8. Also, if you're mower stickers are intact, the belt sizes should be on the sticker near the spindle pulleys.

If control cables become scarce, you might try this source. You can order by housing type, housing length, end type, and cable length. The only issue would be the adjusters in the middle:

http://stollerlawnandgarden.com:8080/Cables.a5w
Thanks for the heads up on the cables.

Does anyone know what the BOP paint code is? I know we can order a can from BOP but Im thinking of buying a quart.
Reply With Quote
 
Page generated in 0.04515 seconds with 7 queries