View Single Post
  #4  
Old 10-25-2012, 09:07 AM
1Sharkey 1Sharkey is offline
LawnSite Member
 
Join Date: Oct 2012
Location: STL
Posts: 29
Quote:
Originally Posted by joe billy View Post
One of the valve guides may have slipped in the head...usually on the exhaust valve.
Posted via Mobile Device
I had one do the same thing. I cleaned the guide and put some loctite on it and tapped it back into the head with a socket. Once in place a punch scored the area around the guide so it cant work back out. Its been if for a long time now with no more bent pushrods.
Reply With Quote
 
Page generated in 0.03311 seconds with 7 queries