wiring question- Honda GX620..
I have this 20hp Honda GX620..can't seem to find spec but it is a Horozontal with the 20amp system. I want to just wire up a simple on/off key switch like some garden tractors. The switch would just kill the ignition. I have a black w/red wire coming from the engine stop diode..It is just hanging from engine at this point and by what I can tell that needs 12v to it. I guess my question is will that be ok to also run to the off switch too? only other wire there is one for the electric selonoid on carb..that too needs 12volts yet. rest go to the rectifier/reg. Also.. need somewhere to tap into for a aux light- thids stuff confuses me. thanks