View Single Post
  #26  
Old 10-30-2012, 01:43 PM
rbljack rbljack is offline
LawnSite Senior Member
 
Join Date: Aug 2012
Location: Texas
Posts: 535
Quote:
Originally Posted by keith.mcginnis View Post
When I soaked the carb in Seafoam (about 24hrs), both Needles were removed so I doubt there is an blockage there. I already reset the needles to 1 turn from bottom. Now the welch plug was left in the carb. Are those replaceable?

I'm really thinking about replacing the carb, but now I'm wondering about the crank seals. LOL. I don't know man, I just hate throwing parts at things. You know.
I follow what your saying there too man. Its rolling the dice a bit. Try doing a few searches on you tube and you may find something related to your problem also. There is one guy on there I watch a lot of his videos called donyboy73, he has a lot of small engine repair vids. Maybe he has something on those crank seals too.
__________________
Equipment:
2000 Chevy 3/4 Ton Long Bed 4x4
6.5x12 Dual Ramp Trailer
2012 21" Honda HRC-216 mower
2013 Exmark Commercial 30#1
2013 Exmark Commercial 30#2
2014 Exmark Lazer Z S Series EFI 52
Mclane 25" Reel Mower
2010 Husqvarna 21" mower
2008 Stihl FS250R Trimmer
2010 Stihl FS90R Trimmer
200? Stihl FC75 Edger
2013 Stihl BR 600 Blower
2013 Stihl HS81 t Hedge Trimmer
2014 Stihl SH 86 C E Blower Vac
2014 Stihl KM130R edger and trimmer shafts
200? Billy Goat AE550 Core Aerator
Reply With Quote
 
Page generated in 0.03949 seconds with 7 queries