View Single Post
  #1  
Old 11-07-2012, 05:04 PM
Ukisuperstar Ukisuperstar is offline
LawnSite Member
 
Join Date: Dec 2009
Posts: 16
Gunite Pool Coping

Used Unilock Brussels Block Fullnose on the beam of a gunite pool (Pool is 40yrs old). For some reason the beam is different thicknesses all around. The pool is "L' shaped with lots of straight edges, some of these edges have the coping over hanging toward the outside of the pool which will cause the ground to pop these pieces off most likely.

Have the option of cutting the stone off, but will not match around the pool. Have also heard to support the rear edge with styrofoam glued to the pool.
Will be adding an expansion joint between the coping and interlock aswell.

Any recommended solutions?
Reply With Quote
 
Page generated in 0.03959 seconds with 7 queries