View Single Post
  #95  
Old 11-11-2012, 02:12 AM
Breezmister's Avatar
Breezmister Breezmister is offline
LawnSite Bronze Member
 
Join Date: Jul 2007
Location: South Jersey
Posts: 1,207
Quote:
Originally Posted by piston slapper View Post
These tools...along with my sanding block... have allowed me to produce near perfect heads every time... for more than 10 years now...
TOOLS DON"T COST MONEY...THEY MAKE MONEY...
For those who don't know, the box on the left is a Neway
valve seat cutter set. The box on the right is a Neway Gizmatic
refacer for cutting the profile (is that the right word ?) on a valve.

These are not cheap tools, but well worth the cost. And don't forget the valve lapping compound and the lapping stick.

And they all can be found here

http://www.cylinderheadsupply.com/
__________________
.
Masters Degree in Thinking Out Side Of The Box,Graduate of the MacGyver Institute of Ingenuity

The primary function of an Engineer is to make it difficult for the Fabricator and impossible for the Mechanic

RTFM What a concept

Reply With Quote
 
Page generated in 0.03384 seconds with 7 queries