View Single Post
Old 11-13-2012, 01:44 PM
piston slapper's Avatar
piston slapper piston slapper is offline
LawnSite Platinum Member
Join Date: Mar 2010
Location: Tampa Fl
Posts: 4,236
Originally Posted by BigFish View Post
That's a depth micrometer. Commonly used by master "techs" to measure the tread depth on front caster wheel tires!
You can also use it to check the combustion chamber depth...
I got it when I was having trouble with machine shops shaving too much off Kohler heads.
The valves like to stay open when you shave them too much..
Shimming the rockers is the only way I have found to overcome that problem.
Doing all the valve and headwork myself was how I eliminated the problem.
If You Have All The Answers...Except The One You Need...You're Not Trying Hard Enough...
Do The Work
Reply With Quote
Page generated in 0.03336 seconds with 8 queries