Originally Posted by greenology
Thanks Michael. I found the bolts on levers, they have no head on them but quite easy to turn with fingers. Would they be the ones you were referring to?
One was stopping the lever making them uneven, so I adjusted thinking this will fix it for sure. But it didnt fix, still the same scenario the left wheel is slower than the right. I had a go at adjusting the arm that joins the lever to the hydro, but I couldnt loosen the lock nut closest to the hyrdo. I was attempting to losen it anti-clockwise but just about rounded the nut head, tried the other way & no luck so gave up before doing too much damage.
Yes the bolts that stop the levers forward motion was what I was suggesting. I would suggest taking back to your dealer for better insight then. It could be something really simple but it may not so go have them make it right.
10% of your customers are 90% of the problem.
You may think the grass is GREENER on the other side, but if you take the time to water your own grass it would be just as GREEN.