View Single Post
Old 11-17-2012, 11:06 AM
dboyd351 dboyd351 is offline
LawnSite Senior Member
Join Date: Sep 2010
Location: Cape Charles, VA
Posts: 939
Have you checked to see if you might have an intake leak? I had a shop put a new carb on a trimmer one time and it did what you are describing - started and idled fine, but would not rev up. Turned out they had not tightened up the carb to the cylinder well (actually left a nut off), so it had an air leak. I tightenet things back up and it ran fine.
Reply With Quote
Page generated in 0.03125 seconds with 7 queries