View Single Post
Old 11-19-2012, 05:59 AM
Richard Martin's Avatar
Richard Martin Richard Martin is offline
LawnSite Fanatic
Join Date: Mar 2000
Location: Greenville, NC
Posts: 14,704
Originally Posted by DiyDave View Post
I have the worm drive clamps, on my 28 EFI Kohler. They keep loosening up, so I keep a 1/4" nut driver near where the mower is parked on the trailer. That keeps 3 of the 4 tight. The other baXXXrd is at an angle that I have to use the snap on 1/4 inch drive u joint on, to tighten it, every time I change the blades down at the shop. That oil cooler is nothing but trouble, with worm drive clamps. You wouldn't have a part number and source for the clamps pictured in your post, wouldja?? Thanks, Dave
Yeah, Dixie used regular hose clamps on their FI hoses. I don'know why, but they have confidence in them. You can get those clamps at any auto parts store. If you go to the Advance Auto Parts at 1143 Annapolis Rd, you can get them there. NAPA, Pep Boys, they all have them.

Reply With Quote
Page generated in 0.04195 seconds with 8 queries