View Single Post
Old 11-19-2012, 09:09 PM
piston slapper's Avatar
piston slapper piston slapper is offline
LawnSite Platinum Member
Join Date: Mar 2010
Location: Tampa Fl
Posts: 4,236
The linkrod that goes to the choke lever has a V bend in it...
Move the throttle cable all the way to choke...
With your finger..push on the V towards the carb...if there is any movement, the choke isnt fully closing.
You can bend the V open a little to lengthen the rod ...which will close the choke..
If You Have All The Answers...Except The One You Need...You're Not Trying Hard Enough...
Do The Work
Reply With Quote
Page generated in 0.03521 seconds with 8 queries