View Single Post
  #15  
Old 11-20-2012, 07:26 PM
Tmurph2960 Tmurph2960 is offline
LawnSite Member
 
Join Date: Oct 2012
Posts: 10
.004 to .006. You will need a hex wrench set, feeler gauge, and a socket set. Turn the engine over until you have it at top dead center. Both valves should be closed and the piston at the top of its stroke. Check your gap then and if it is greater than .006 then adjust.
Reply With Quote
 
Page generated in 0.03765 seconds with 7 queries